Titanium™ Turbo Shield/Blanket - GEN-3 T25/T28 Kit

SKU:
10246
(
010246
)
|
UPC:
607078102461
Made in the U.S.A.US Flag
R$1.847,32
(No reviews yet)
Current Stock:
4
Adding to cart… The item has been added

SEE THE GEN3 DIFFERENCE

We raised the bar.

The most technologically advanced turbo shield ever!

We incorporated all our experience to build the absolute best turbo shield on the market. By developing advanced textiles and diving deep into what is needed to control turbo heat, we developed the GEN-3 TITANIUM Turbo Shield. A Silicone coated TITANIUM LR outer layer with multiple stainless steel and silica inner layers. Without a doubt the strongest, most heat resistant shield available.

Kit includes:

  • One Turbo Shield
  • 2" x 15' roll of Titanium Exhaust Wrap
  • Two 20" Stainless Steel Locking Ties
  • 5' Stainless Steel Wire

OUTER SHELL

  • Coated in silicone to insulate and hold up under extreme conditions.
  • Prevents fraying & encases seams to make them over 4 times stronger.

INSULATION LAYER

  • Thick layer of silica insulation keep heat in turbo shield and turbo housing.
  • Silica has a low thermal conductivity making one of the best insulators.

INNER LAYER

  • Stainless steel, glass fiber & silicone adds to insulating and thermal properties.
  • Increases seam strength, durability and insulation value.

INNER COVER

  • Stainless Steel fabric holds up against the highest temps.
  • Will not break down or become brittle with heat.
Size:
T25/28

Turbo Application Guide

Measuring your turbo size

DEI Turbo shield sizes are based on two basic measurements. The first measurement is the circumference of the turbo not including the flange. The second measurement is the width of the turbo at it’s widest point not including the flanges. After measuring, refer to the chart below to find the correct shield.

Our T22 and T25/28 shields are designed for use on internally gated housings.  They will have a cutout in the wastegate area to allow for a tight fitment.

TURBO MEASUREMENTS CHART
TURBO CIRCUMFERENCE WIDTH
T22 15" 2.25"
T25/28 15" - 16" 2.5"
T3 15" - 16" 2.5"
T4 20" - 22" 2.75"
T6 26" 3.75"
T6X 26" 4.25"
Turbo Measuring
AFTERMARKET AND OEM TURBOS
MAKE MODEL NOTES TURBO SHIELD SIZE
Borg-Warner S300 < = 14cm2 turbine housing T3
  S300 > = 16cm2 turbine housing T4
  S400   T4
Garrett GT35R with T3 turbine housing T3
  GT35R with T4 turbine housing T4
  GT37R   T4
  GT42/GT45 a/r 1.01-1.4 for tight fit T4
  GT42/GT45 a/r 1.01-1.4 for loose fit T6
  GT47 ~3" short on length T6
Precision, TiAL, Turbonetics   All with T3 V-band T3
Mitsubishi   MHI TD04/TD05 Turbochargers - internally gated (Talon, Eclipse, Laser) T22
Subaru   MHI TD04/TD05 Turbochargers - internally gated (Impreza WRX, STI) T22
    IHI VF39/VF43 Turbochargers - internally gated (Impreza WRX, STI) T22
  OEM '02-'07 WRX/STI T22
Blouch   EVO 3 big 16 G T22
OEM DIESEL TRUCK APPLICATIONS
MAKE YEAR ENGINE TURBO TURBO SHIELD SIZE
Dodge 1994 - 2002 5.9L Cummins Stock Holset T3
  2003 - 2007 5.9L Cummins Stock Holset T3
  2007.5 - 2010 6.7L Cummins Stock Holset T4
Chevy/GMC 1993 - 1999 6.5L Turbo Diesel Stock IHI  T25/T28
  2001 - 2004 LB7 6.6L Duramax Stock IHI  T3
  2004.5 - 2010 LLY, LBZ, LMM 6.6L Duramax  Stock Garrett T4
Ford  2003 - 2007 6.0L Power Stroke Stock Garrett T4