EXO Sleeve™ Abrasion Resistant Sleeving - 3/8" x 36"

EXO Sleeve™ Abrasion Resistant Sleeving - 3/8" x 36"

SKU:
10872
(
010872
)
|
UPC:
607078108722
Made in the U.S.A.US Flag
What's included:
One 36 inch length of EXO Sleeve with a 3/8 inch inside diameter.
$35.99
(1 review)
Current Stock:
5
Adding to cart… The item has been added
Description

A high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% silicone rubber with 304 stainless mesh outer covering, EXO Sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F.

  • Silicone glass sleeve (DEI Fire Sleeve) surrounded by 304 stainless mesh outer coating
  • Allows direct contact to heat source
  • Highly abrasion resistant
  • Provides air flow around sleeve
  • Perfect for insulating wiring, hoses, oil / brake / transmission lines & more
  • Size: 0.375 (3/8) inch x 36 inches

Fitment Chart

AN Conversion Chart
AN Size
Metal Tube O.D.
Thread Size
2
1/8"
5/16 24 SAE
3
3/16"
3/8 24 SAE
4
1/4"
7/16 20 SAE
5
5/16"
3/8 18 SAE
6
3/8"
9/16 18 SAE
8
1/2"
3/4 16 SAE
10
5/8"
7/8 14 SAE
12
3/4"
1-1/16 12 SAE
16
1"
1-5/16 12 SAE
20
1-1/4"
1-5/8 12 SAE
24
1-1/2"
1-7/8 12 SAE
28
1-3/4"
2-1/4 12 SAE
32
2"
2-1/2 12 SAE
Fire Sleeve Application Chart
Part#
Name
Line Size*
10470
3/8" Fire Sleeve
3AN
4AN
6AN**
10472
5/8" Fire Sleeve
6AN
8AN
10474
1" Fire Sleeve
10AN
12AN
16AN**
5/8" Heater Hose
3/4" Heater Hose

*Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines.

**Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16" and 1/8" stretch out of our material. This may help on installs with fittings already on the lines.

Direct Heat Resistance:
500°F

Length:
36 inch

ID:
10 mm

ID:
3/8 inch

Documents & Downloads
Frequently Asked Questions:
Line Sleeving FAQ.pdf
Related Products

Reviews

  • 5
    The Best!!

    Posted by S.Miller on Sep 9th 2026

    The Exo Sleeve is exactly what I needed to protect the exposed PTFE lines of my water methanol injection system from the extremely hot engine temps both during and after a long day of testing with WOT pulls and racing. Definitely a must have for anyone looking to protect their highly modified custom setup!