Fire Sleeve™ & Tape Kit

Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution.

Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F.

Each kit (except by-the-linear-foot sizes*) includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look.

Insulates wiring, hoses, oil / brakes / transmission lines & more
Use for bundling & protecting hoses, electrical wiring, etc.
Withstands 2000°F of intermittent heat

*By-the-linear-foot orders must order tape separately.

Fitment Chart

AN Conversion Chart

AN Size

Metal Tube O.D.

Thread Size

2

1/8"

5/16 24 SAE

3

3/16"

3/8 24 SAE

4

1/4"

7/16 20 SAE

5

5/16"

3/8 18 SAE

6

3/8"

9/16 18 SAE

8

1/2"

3/4 16 SAE

10

5/8"

7/8 14 SAE

12

3/4"

1-1/16 12 SAE

16

1"

1-5/16 12 SAE

20

1-1/4"

1-5/8 12 SAE

24

1-1/2"

1-7/8 12 SAE

28

1-3/4"

2-1/4 12 SAE

32

2"

2-1/2 12 SAE

Fire Sleeve Application Chart

Part#

Name

Line Size*

010470

3/8" Fire Sleeve

3AN
4AN
6AN**

010472

5/8" Fire Sleeve

6AN
8AN

010474

1" Fire Sleeve

10AN
12AN
16AN**
5/8" Heater Hose
3/4" Heater Hose

*Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines.

**Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16" and 1/8" stretch out of our material. This may help on installs with fittings already on the lines.