Reflect-A-Cool™ - 12" x 12"
Reflect-A-Cool™ solves the problem of heat intrusion into interiors and components.
Reflect-A-Cool™, constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool™ can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy.
- Protect wires, cables, hoses, pipes & tubing from radiant heat sources
- Radiant heat protection up to 2000°F
- Self-adhesive backing with release liner for easy installation
- Moisture & solvent resistant
- Virtually NO clearance needed
- Light weight and flexible-Trim to size
- 0.0065" thick
- Easy to apply, won't lift off
*DO NOT apply directly to exhaust components.
- Direct Heat Resistance:
- Radiant Heat Resistance:
Heat Screen™ - 12" x 24"
Floor & Tunnel Shield II™ - 10" x 10"
Reflect-A-GOLD™ Heat Reflective Roll - 24" x 150'
Heat Screen GOLD™ - 24" x 24"
reflect a cool
this worked very nicely, had great adhesion and was easy to use. will buy more as time goes along ...definitely recommend
I used this product to line the inside of the right rear side cover of my 2006 Honda CRF250X that covers the muffler. I bought new plastics for it and they did not come with the heat shield like the OEM ones do. This did the trick. Easy to to cut and install, even with all the different angles on the inside of the side cover. The adhesive is very sticky but still allows removing if necessary to make sure it’s in the right place. Looks good when finished.
I used this product to insulate the firewall and foot boxes of my Hurricane 427 Roadster cobra kit car. The exhaust headers are about an inch from the front of the foot box so the radiant heat from the pipes comes blasting into the foot boxes. The answer to this was to apply the Reflect-A-Cool to the foot boxes and firewall. I was blown away at the difference. Now the foot boxes have NO radiant heat coming into them and it is much more comfortable for my feet. Great product and great service guys!