
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution.
Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F.
- Insulates wiring, hoses, oil / brakes / transmission lines & more
- Use for bundling & protecting hoses, electrical wiring, etc.
- Withstands 2000°F of intermittent heat
- Fire Tape must be ordered separately
- Minimum bulk length available is 4 feet
Fitment Chart
4AN
6AN**
8AN
12AN
16AN**
5/8" Heater Hose
3/4" Heater Hose
*Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines.
**Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16" and 1/8" stretch out of our material. This may help on installs with fittings already on the lines.
- Radiant Heat Resistance:
- 2000°F
- Direct Heat Resistance:
- 500°F
-
Fire Wrap 3000™ - 1" ID by linear foot
91478$29.62 -
Fire Sleeve™ - 0.625" ID by linear foot
91472$6.95 -
Fire Sleeve™ & Tape Kit - 1" ID x 36"
10474$45.69 -
Fire Tape™ - Self Vulcanizing Tape
10476$51.91 -
-
Fire Sleeve™ - 0.75" ID by linear foot
91473$8.15 -
Fire Wrap 3000™ - 0.625" ID by linear foot
91477$27.25 -
Fire Wrap 3000™ - 1.5" ID by linear foot
91479$37.62 -
Fire Wrap 3000™ - 1" ID x 24"
10478$71.80 -