Easy Loom™ Master Kit
(010663 )
|
Made in the U.S.A.
One Easy Loom each in the following lengths: 1 inch by 6 foot, 3/4 inch by 10 foot, 1/2 inch by 30 foot, 5/16 inch by 60 foot, 3/16 inch by 15 foot. Also included are one 3/8 inch by 2 foot Heat Shrink, one 1/4 inch by 1 foot Heat Shrink, one 1/2 inch by 1 foot Heat Shrink, forty 8 inch plastic ties, one hundred 4 inch plastic ties, one 1 inch by 12 foot roll of silicone tape, one roll of electrical tape, one large line sleeving tool, and one small line sleeving tool.
₦240,389.43
Everything to protect and restore your factory or aftermarket wire harness from abrasion, chemicals and the elements. 5 different diameter Easy Loom sleeves, Shrink tube ends, silicone tape, locking ties, electrical tape, and now includes a small and large line sleeving tool.
- Protects against abrasion and the elements
- Tested to 302°F/150°C
- Self-extinguishing
- Resists the majority of chemicals and automotive fluids
- Clean, classy way to protect wires, hoses & cables
- Superior style & function vs. plastic tubing
- Split design makes installation easy
- No need to disconnect wires
- Available in multiple diameters
- Produced from durable P.E.T. monofilament that provides strength, flexibility, and durability while resisting chemicals, UV rays, and moisture
Kit Includes:
- 1 - 1" x 6 ft Easy Loom
- 1 - 3/4" x 10 ft Easy Loom
- 1 - 1/2" x 30 ft Easy Loom
- 1 - 5/16" x 60 ft Easy Loom
- 1 - 3/16" x 15 ft Easy Loom
- 1 - 3/8" x 2 ft Heat Shrink
- 1 - 1/4" x 1 ft Heat Shrink
- 1 - 1/2" x 1 ft Heat Shrink
- 40 - 8" Ties
- 100 - 4" Ties
- 1 - 1" x 12 ft Silicone Tape
- 1 - Roll of Electrical Tape
- Newly added! - 1 large & 1 small line sleeving tool
- Melting Point:
- 500°F
- Length:
- 6 feet
- Length:
- 10 feet
- Length:
- 30 feet
- Length:
- 60 feet
- Length:
- 15 feet
- ID:
- 1 inch
- ID:
- 3/4 inch
- ID:
- 1/2 inch
- ID:
- 5/16 inch
- ID:
- 3/16 inch
- ID:
- 25 mm
- ID:
- 19 mm
- ID:
- 12 mm
- ID:
- 8 mm
- ID:
- 5 mm
Reviews
-
Master Kit
I'd been looking for a product to dress up the underhood area of a restomod project we've tackled. This has all you need to "pretty up" and protect those under-hood wire looms. Good quality, easy to install...You can't go wrong with this one!
-
Easy Loom Master Kit
I used this product to insulate wiring in the engine compartment of my Hurricane Roadster 427 (Cobra Kit Car). I absolutely love this stuff. Much more professional looking AND DURABLE than the plastic wire loom. The kit is easy to work with and leaves a finished product that looks great and makes it so I don't worry about an electrical fire due to melted plastic loom. Also, the customer service at Design Engineering is second to none.
