Product Guide

ATAC Advanced Thermal Acoustic Coating
atac300.png

A revolution in automotive interior comfort! A one-step solution to control both heat and sound that will transform the interior of your vehicle into an oasis of comfort. Upgrade your driving experience with ATAC Advanced Thermal Acoustic Coating and discover a new world of comfort and quiet. It's time to silence the noise, beat the heat, and elevate your vehicle with ATAC.

  • One-step solution to control both heat and sound
  • Can be sprayed or rolled/brushed on
  • Gallon covers 75 sq. ft. - Spray can covers 12 sq. ft.
  • Gets into hard to reach areas
  • Quieter, Cooler, more comfortable interiors
  • Non-toxic
  • Can be painted to match body color
  • Water-based, cleans up easily
  • Saves time and money

Roof Firewall Floor Doors Fenders Speaker Deck Trunk

Floors, door skins, trunks, roofs, wheel wells and any vertical or horizontal interior surface. Hard to reach areas such as trunk interiors, fender wells, undercarriage, body panels, rear quarters and inside door panels.

BOOM MAT & BOOM MAT XL Damping Material
vdamp300.png

Premium quality damping material providing extreme noise damping for the most demanding commercial and sound competition applications. Stops noise by trapping it between our thick, 4 mil aluminum stiffening top skin and the asphalt free, pure butyl, noise constraining layer. Worry-free, no snag adhesion to any interior surface, vertical or overhead, even in the most demanding of temperature extremes. Requires only 25-50% coverage, saving weight, material cost and installation time.

  • Proprietary viscoelastic polymer
  • Hi-temp adhesive backing
  • 30-50% more efficient energy dissipation
  • Minimal prep needed
  • Usage on inverted surfaces
  • Less material needed for similar competitor's performance
  • Saves install time
  • Performs in extreme temp

Firewall Floor Doors Speaker Deck Trunk

Floors, door skins, trunks, roofs, any vertical or horizontal interior surface

BOOM MAT Flex Damping Material
flex.png

Made from the same high quality 2.5mm thick Butyl rubber but with a clear poly surface and can be used to form around tight curves, inside wheel wells, around tubing & pipes and other areas where the standard Boom Mat Aluminum may not conform easily.

  • Proprietary viscoelastic polymer
  • Hi-temp adhesive backing
  • Clear skin - no aluminum constraining layer
  • 30-50% more efficient energy dissipation
  • Minimal prep needed
  • Usage on inverted surfaces
  • Less material needed for similar competitor's performance
  • Performs in extreme temp
  • Clear skin allows it to conform to tight bends

Roof Firewall Floor Doors Fenders Trunk

Floors, door skins, trunks, roofs, wheel wells and any vertical or horizontal interior surface

BOOM MAT Damping Spray
dampspray.png

Perfect for reducing unwanted road noise and deadening vibrations in those hard to reach places. Can be applied in multiple layers for even more sound deadening while witstanding temperatures up to 300 degrees F. Can be applied to non-coated surfaces and can be top coated with paint after only 6 hours of dry time.

  • Easy to spray on vibration damping
  • Can be painted to match
  • Covers 20 sq. ft.
  • Gets into hard to reach areas
  • Seals out moisture
  • Saves time with quick install
  • Quieter, more comfortable interiors
  • Clean finished, paintable look
  • Remains flexible, won’t crack

Firewall Doors Fenders Speaker Deck Trunk

Hard to reach areas such as trunk interiors, fender wells, undercarriage, body panels, rear quarters and inside door panels.

BOOM MAT Liquid Damping
bbm300.png

Reduce the vibration from structure borne noise in those hard to reach areas such as trunk interiors, fender wells, undercarriage, body panels, rear quarters, inside door panels, trunks, roofs, any vertical or horizontal interior surface. All the benefits of Boom Mat Damping Material in one easy to apply liquid!

  • For larger jobs and greater coverage
  • Dries in 20 minutes and is paintable
  • Perfect for hard-to-reach areas
  • Prevents rust by sealing out moisture

Firewall Doors Fenders Speaker Deck Trunk

Hard to reach areas such as trunk interiors, fender wells, undercarriage, body panels, rear quarters and inside door panels.

Under Carpet "UC"
uc.png

A second layer sound deadening and insulation mat that will help you maintain a quality ride experience by preventing unwanted noise from being transferred into the vehicle's interior. Provides superior insulation keeping vehicles cool in the heat of summer, and warmer in cold temperature climates. Made of a flexible, one pound per square foot mass loaded barrier material top layer, and a high quality industrial acoustical marine grade foam bottom layer.

  • 1 lb/ft² mass loaded barrier layer
  • Marine grade acoustic foam decoupling layer
  • 5.6 dBA reduction - a 25% noise reduction over leading competitor
  • Reduces high frequency noises and provides thermal insulation
  • Makes interior luxury vehicle quiet
  • Increases interior sound quality, clarity and comfort

Firewall Floor Fenders Speaker Deck Trunk

Firewalls, floor boards, transmission tunnels, behind rear seats, inner wheel wells, trunk floors, rear quarter panels

Under Carpet Lite "UC Lite"
uclite.png

Superior sound decoupling material for those hard to cover areas like door liners, rear decks, headliners and more. A ½" thick multi-layer, high tech composite material designed to be extremely flexible and easy to install. Offers maximum thermal insulation in a lightweight padding (approx. 0.23lbs per square foot) that provides less heat transfer in the summer while protecting against the transfer of cold air in the winter.

  • Multi-Layer hi-tech composite material
  • Economical, lite weight, extremely flexible
  • Insulates up to 85% of unwanted heat and lowers interior noise levels average of 3dBA
  • Weight savings and easy install
  • Quiet comfortable interior
  • Cost effective exceptional noise and heat control

Firewall Floor Doors Fenders Trunk

Floor pans, firewalls, transmission tunnels, behind back seat, inner fender wells, rear quarter panels, trunk floors, under headliners, kick panels

Ultra Block
ultrablock300.png

Engineered to reduce extreme temperatures and unwanted sound in even the toughest environments. Shields against heat and dampens noise from generators, under-hood areas, and more. Perfect as a hood liner or for any high-heat, high-noise application. Create a quieter, cooler, and more comfortable experience.

  • Lightweight, open cell, acoustic foam with reflective mylar face
  • Reflects heat up to 428°F
  • Easy install with aggressive adhesive backing - Just peel & stick
  • Excellent flammability resistance* - meets the requirements of FAR 25.856(a)
  • Perfect for lining generator boxes and other closed, confined areas where heat and noise are issues
  • Measures 48” x 48”

Hood Firewall

Generators, under-hood areas, and any high-heat, high-noise application.

Under Hood Thermal Acoustic Lining
uh.png

Reduce heat and noise with a simple and easy peel and stick application. Made of ¾" thick, high quality, marine grade acoustical foam with a fiberglass reinforced reflective aluminum skin while the 5 mil acrylic adhesive provides a permanent bond. Insulates the underside of the hood for sound deadening and thermal control. Protects the vehicle's paint finish. Can be used in noise control applications such as on generator boxes and many industrial uses including HVAC applications.

  • 3/4” thick marine grade acoustical foam
  • Measures 32” x 54”
  • Composite reinforced foil skin
  • Absorbs engine and unwanted noises
  • Durability and heat insulating capabilities
  • Quieter interior and more enjoyable driving experience
  • Creates thermal barrier insulating surfaces it is applied to

Hood

Under hoods, generator compartments, engine covers (dog house), marine and RV engine compartments

Black Under Hood Thermal Acoustic Lining
buh.png

Reduce heat and noise with a simple and easy peel and stick application. Made of 1/2" thick, high quality acoustical polymer blend in a cool black finish. Insulates the underside of the hood for sound deadening and thermal control. Protects the vehicle's paint finish. Can be used in noise control applications such as on generator boxes and many industrial uses including HVAC applications.

  • 1/2” Light advanced polymer blend insulation
  • Measures 32” x 59”
  • Two thicknesses available 12mm and 30mm
  • Reduced heat and sound
  • Handles 300°F
  • Passes MSVV-302 Flammability test
  • Protects painted hood surfaces from heat
  • Replaces missing, damaged or worn out hood liners

Hood

Under hoods, generator compartments, engine covers (dog house), marine and RV engine compartments

Floor & Tunnel Shield (Aluminum & Black)
fntb.png

Use as a barrier to reflect and insulate from any heat source. Limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, withstands up to 1750°F. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. Can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.

  • Multi-faceted aluminum surface
  • 3/16” Thick
  • Aggressive hi-temp adhesive backing
  • Withstands 1750˚F direct heat
  • Holds past 450˚F
  • Keeps interior cool by creating a barrier between heat source and your interior
  • Will not peel away in the most demanding applications
  • Available in stealth black finish - almost disappears on under side of vehicle

FOR EXTERIOR, NON-CABIN USE ONLY

Firewall Floor

Fire walls, transmission tunnels, on floor boards above header collectors, catalytic converters, mufflers and exhaust pipes, fuel cells, motorcycle fairings, engine covers (dog house), marine & RV engine compartments, reflect turbo heat

Vapor Barrier
vaporbarrier300.png

Block moisture, reduce noise, and insulate doors with this hi-tech, lightweight vapor barrier. Powerful vapor barrier, blocking moisture while providing insulation against noise and extreme temperatures. Perfect for preserving a quieter, more comfortable cabin environment with high-quality soundproofing and thermal insulation. Achieve next-level insulation and moisture resistance.

  • Hi-Tech, light weight vapor barrier
  • Closed cell PVC foam with reflective ALUMINUM facing
  • Reduces condensation, noise, and vibration
  • Conforms to irregular surfaces
  • Adhesive backing for easy install
  • Replaces worn-out, ineffective vapor barriers

Doors

Interior side of door panels.

D-Mat Insulation
dmat.png

Designed for under headliners, doors, package trays and other areas. Extremely light weight and pliable. Compressible and pliable. Made from a polymer blend with a scrim backing, can be used in applications up to 325°F while showing up to an 65% reduction in heat. Exceptional acoustic absorption, meets flammability rating, and is mildew and bacteria resistant.

  • Light advanced polymer blend insulation
  • Passes FMVSS-302 Flammability test
  • Two thicknesses available 12mm and 30mm
  • Shows up to a 65% reduction in heat
  • Weight savings and easy install
  • Exceptional acoustic absorption
  • Mildew and bacteria resistant
  • Cost effective exceptional noise and heat control
  • 12mm thick

Roof Doors Fenders Speaker Deck

Behind back seat, inner fender wells, rear quarter panels, under headliners, kick panels, rear speaker decks, inside door panels

Sound Barrier & Leather Look Sound Barrier
sbllsb.png

Sound Barrier and Leather Look Sound Barrier are a one solution for heat and sound control. Extremely light weight and easy to trim and install. Increases interior sound quality, clarity and comfort. Provides a 5.6 dBA reduction - a 25% noise reduction over leading competitor with a high level of abrasion resistance.

Sound Barrier:

  • 0.75 lb/ft² mass loaded barrier layer
  • 1/2” Non-woven sound absorption layer
  • Fits great under carpets as replacement for jute or carpet padding

Leather Look Sound Barrier:

  • 1 lb/ft² mass loaded barrier layer with embossed leather grain look
  • Marine grade acoustic foam decoupling layer
  • Makes interior luxury vehicle quiet and gives a finished leather look

Roof Floor Doors Fenders Speaker Deck Trunk

Under carpets on floors, transmission tunnels, rear speaker decks, trunks, door panels, headliner, floor boards, engine cover (dog house)