Intercooler Sprayer Kit
$702.92
The CryO² Intercooler Sprayer Kit includes everything needed to enhance the intercooler's thermal transfer ability and improve its efficiency by as much as 50%. Kit includes 10 lb. tank and brackets, Cryogenic solenoid valve, 14 ft. stainless steel braided supply line, Arming, activation, and WOT switches, All necessary CO₂ fittings and electrical hardware, and 16in x 5in front-mount intercooler sprayer and hardware.
- Enhances intercooler thermal transfer ability
- Lowers air temperatures by as much as 35%
- Improves intercooler efficiency by as much as 50%
- Non-injectable system - ability to run more boost safely
- Straight forward, easy bolt-on installation
- CO₂ is less expensive to refill than nitrous
Kit includes:
- 10lb. tank and brackets
- Cryogenic solenoid valve
- 14ft stainless steel braided supply line
- Arming, activation & WOT switches
- CO₂ fittings
- Electrical hardware
- 16" x 5" front-mount intercooler sprayer & hardware
- Four (4) 14" Stainless Steel Locking Ties
Instruction Sheet:
Frequently Asked Questions:
 |
“WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. – www.P65Warnings.ca.gov” |
Related Products
$28.91
When mounting heat shields or other materials it can be difficult to make it look professional. DEI has put together a complete Grommet and Tie kit: a heat shield mounting kit to make any install...
As low as
$40.68
Design Engineering is leading the way with the most advanced Thermal Acoustic kits for your first Generation Camaro and Firebird F-body cars (1967-1969). Using a combination of our new D-Mat ultra...
As low as
$110.61
CryO²™ Intercooler Sprayers mount directly to the front of air-to-air intercoolers and serves as a way to vent the liquid CO₂ directly onto the cooling fins thus, enhancing the...
$107.61
DEI's CryO² Intercooler Water Sprayer Kit was designed to be used by itself or in conjunction with DEI's CryO² Intercooler Sprayers as a way to supercool intercoolers. By wetting...
$98.98
Shown here with a pair of Stainless Steel Braided Hose lines, The CryO² Line Splitter is made to work with Dual CryO² Intercooler sprayers or purges.
Customers Also Viewed
$107.61
DEI's CryO² Intercooler Water Sprayer Kit was designed to be used by itself or in conjunction with DEI's CryO² Intercooler Sprayers as a way to supercool intercoolers. By wetting...
As low as
$197.65
The CryO²™ patented* Air Intake consists of an aerodynamically designed bulb with a cryogenic chamber which is mounted in a short segment of air tube. Air is cooled as it passes over the...
As low as
$110.61
CryO²™ Intercooler Sprayers mount directly to the front of air-to-air intercoolers and serves as a way to vent the liquid CO₂ directly onto the cooling fins thus, enhancing the...
$389.61
Design Engineering's next generation method of chilling the temperature of fuel before entering the intake stream - the CryO² Fuel Chiller System! The new CryO² Fuel Chiller System uses the...